隨著我國國民經濟發展步伐加快,國民生產總值的也在不斷增加,這也可以表現出我國工業企業的規模在逐漸擴大,企業內部所具備的電力系統的結構的也逐漸完善。在高壓電氣設備運行時,如何防范因出現故障而高壓電氣設備出現停止運行的情況,這是所有工作人員都需要進行思考的重要問題。本文依據工業電氣設備的發展情況,分析了電氣設備在維修與檢查方面應該要采取的措施,從而促進企業的快速發展。

With the rapid development of China's national economy, the GDP is also increasing, which can also show that the scale of China's industrial enterprises is gradually expanding, and the internal structure of the power system is also gradually improving. In the operation of high-voltage electrical equipment, how to prevent the high-voltage electrical equipment from stopping operation due to failure is an important problem that all staff need to think about. Based on the development of industrial electrical equipment, this paper analyzes the measures that should be taken in the maintenance and inspection of electrical equipment, so as to promote the rapid development of enterprises.

我國各類工廠的生產、經營主要靠各種各樣大型電氣設備、機械設備的一起合作完成。由于電氣設備的類型、質量千差萬別，因此對電氣設備的進行維護和管理是一項比較、復雜的工作。在實際操作過程中，電氣設備的維護將更加復雜，需要電氣維護管理人員掌握的電氣知識，足夠了解電氣設備出現的情況，從而使維護工作達到合理、科學、明確的目標，促進高壓電氣設備維護過程的完善。

The production and operation of all kinds of factories in China mainly depend on the cooperation of all kinds of large electrical equipment and mechanical equipment. Due to the different types and quality of electrical equipment, the maintenance and management of electrical equipment is a more professional and complex work. In the actual operation process, the maintenance of electrical equipment will be more complex, electrical maintenance management personnel need to master professional electrical knowledge, enough to understand the situation of electrical equipment, so as to make the maintenance work to achieve a reasonable, scientific and clear goal, and promote the improvement of high-voltage electrical equipment maintenance process.
                         

高壓配電系統內的設備包括金具、支持絕緣子、母線、避雷器、電壓互感器、電流互感器、隔離開關、高壓開關等。在系統的正常運作下，這些系統設備都應該順利地運行，完成配電任務。而完善的維護工作可以保證高壓配電系統的正常運行，主要維護要求為：要經過運行維護完成SCADA數據監視與采集，從而保證配電系統的運行參數可以達到正常狀態的既定約束條件;其次經過實施維護實現DSM與LM用以改善正常狀態下的負荷曲線，以免在達到峰值的時候出現過度負荷引起違反不等式約束條件的情況;經過實施維護可以完成在正常狀態的情況下，DMS通過電壓/無功優化與負荷平衡來減少網損，促進配電系統的順利運行。然后經過實施維護在不同受力狀態與氣象條件完成力學計算。其系數不能低于規定數值，以免出現事故。在高壓配電系統的正常運行時，維護工作需要保證其設計方案和實施內容可以維持正常的工作的進行，并且也可以使配電系統得到保障。而在實際的配電系統維護時，也需要考慮到系統正常運行的情況，做出合理、的維護方案。

The equipment in the high voltage distribution system includes fittings, supporting insulator, bus, lightning arrester, voltage transformer, current transformer, isolating switch, high voltage switch, etc. In the normal operation of the system, these system equipment should run smoothly to complete the distribution task. Perfect maintenance can ensure the normal operation of high-voltage distribution system. The main maintenance requirements are as follows: first, SCADA data monitoring and acquisition should be completed through operation and maintenance, so as to ensure that the operation parameters of distribution system can reach the established constraints of normal state; Secondly, DSM and LM are implemented through maintenance to improve the load curve under normal state, so as to avoid the situation that excessive load causes violation of inequality constraints when it reaches the peak value; DMS can reduce network loss through voltage / reactive power optimization and load balance under normal state through implementation maintenance, so as to promote the smooth operation of distribution system. Then, after maintenance, the mechanical calculation is completed in different stress states and meteorological conditions. The safety factor should not be lower than the specified value to avoid safety accidents. In the normal operation of high-voltage distribution system, the maintenance work needs to ensure that its design and implementation can maintain the normal work, and also can ensure the safety of the distribution system. In the actual distribution system maintenance, we also need to consider the normal operation of the system and make a reasonable and comprehensive maintenance plan.