隨著科技水平的不斷發展，社會工業化產業也得到不斷發展，工業設備的維修與養護也隨之受到了更多的關注。對于我國發展度高的工業化，必須積極引進新式的工業設備，同時對工業設備進行合理的電氣維護與保養，從而保障工業化進程的不斷發展。另外，提高工業設備的使用率以及工業設備的生產率都可以有效地對工業化的發展添磚加瓦。本文就工業化建設中對于工業設備的電氣維護及保養方法展開了研究，并提出一些可以改善目前工業設備現狀的有效措施，從而保障工業設備的正常運行，提高設備的使用效率，為企業的經濟發展增添動力。

　　With the continuous development of technology, the social industrialization industry has also been constantly developing, and the maintenance and upkeep of industrial equipment have also received more attention. For the highly developed industrialization in our country, it is necessary to actively introduce new industrial equipment and carry out reasonable electrical maintenance and upkeep of industrial equipment to ensure the continuous development of the industrialization process. In addition, increasing the utilization rate and productivity of industrial equipment can effectively contribute to the development of industrialization. This article conducts research on the electrical maintenance and upkeep methods of industrial equipment in industrial construction, and proposes effective measures to improve the current situation of industrial equipment, thereby ensuring the normal operation of industrial equipment, improving equipment efficiency, and adding impetus to the economic development of enterprises.

　　一、電氣維護及保養的重要性在正常的生產與運作中，對于電氣設備的使用是必不可少的，同時電氣設備的使用率在整個施工中也占據著很大的比例。作為維護和支撐工程項目正常運作的重要環節，電氣設備是否可以正常運轉具有很大的現實性意義，并且直接對項目工程的發展與生產有著重要的影響。更深層次講，電氣設備的正常運轉會直接為企業的經濟利益帶來巨大的積極作用。一旦電氣設備出現故障，則會導致停電的現象，甚導致企業工程無法繼續進行。生產活動由于電氣設備的故障而無法進行就會使得生產環節中斷，從而無法正常對訂單進行生產，為企業帶來巨大的經濟損失，甚為企業的信譽度帶來危機。一旦事故發生規模過大還會影響整個企業的正常運營，甚威脅到企業的，導致企業倒閉或破產。因此，電器設備的維護與保養具有很重要的現實性意義，直接關乎著企業的生產與運作，甚對企業的長久發展產生影響。只有高度重視工業設備的維護與保養才能保證企業正常進行生產運作，對企業的發展帶來長久性的意義。

　　1、 The importance of electrical maintenance and upkeep is essential for the normal production and operation of electrical equipment, and the utilization rate of electrical equipment also accounts for a large proportion in the entire construction process. As an important link in maintaining and supporting the normal operation of engineering projects, whether electrical equipment can operate normally has great practical significance and directly affects the development and production of project engineering. At a deeper level, the normal operation of electrical equipment will directly bring huge positive effects to the economic interests of enterprises. Once electrical equipment malfunctions, it can lead to power outages and even prevent the continuation of enterprise projects. Production activities that cannot be carried out due to electrical equipment failures can interrupt the production process, making it impossible to produce orders normally, causing huge economic losses to the enterprise, and even posing a crisis to the enterprise's reputation. Once an accident occurs on a large scale, it can still affect the normal operation of the entire enterprise, and even threaten the safety of the enterprise, leading to bankruptcy or closure. Therefore, the maintenance and upkeep of electrical equipment have significant practical significance, directly affecting the production and operation of enterprises, and even having an impact on their long-term development. Only by attaching great importance to the maintenance and upkeep of industrial equipment can enterprises ensure normal production operations and bring long-term significance to their development.

　　二、電氣維護與保養原則（一）性對于電氣設備的保養原則一定要保證性，確保從整體的方面出發對設備進行整修。一旦發現設備出現問題，需要立即停止進行整修，并且觀察設備當前的情況，分析出現異常的原因，并根據分析的原因?qū)﹄姎庠O備進行維修和保養。對于的設備一定要了解電氣設備的電路情況，并對電氣設備的內部結構進行分析，嚴格按照設備的使用說明對設備進行維護。只有經過精密的檢查，確保了電氣設備維修與保養程序的完整性才能更好地對電氣設備進行維護，從而保障整個工程實施的流暢性。并且堅持性還可以保證維修人員可以充分認識到機器設備的使用狀況，從而保證工業電氣設備的運行，推進整個工程的進度。

　　2、 Electrical maintenance and upkeep principles (1) comprehensiveness. Firstly, the maintenance principles for electrical equipment must ensure comprehensiveness, ensuring that the equipment is repaired from a holistic perspective. Once a problem is found with the equipment, it is necessary to immediately stop repairing it, observe the current condition of the equipment, analyze the reasons for the abnormality, and repair and maintain the electrical equipment based on the analyzed reasons. For advanced equipment, it is necessary to first understand the circuit situation of the electrical equipment, analyze the internal structure of the electrical equipment, and strictly maintain the equipment according to the instructions for use. Only through precise inspection can the integrity of electrical equipment maintenance and upkeep procedures be ensured in order to better maintain electrical equipment and ensure the smooth implementation of the entire project. And adhering to comprehensiveness can also ensure that maintenance personnel can fully understand the usage status of machinery and equipment, thereby ensuring the operation of industrial electrical equipment and promoting the progress of the entire project.

　　(二）徹底性 其次，對于電氣設備的維護與保養必須貫徹徹底性的原則。當電氣設備出現故障時要對電氣設備出現故障的原因進行徹底的勘察，并仔細檢查機器設備是否存在損傷以及不當?shù)牡胤?。對于細?jié)問題也是要進行深入的檢查，從而明確設備出現故障的內外部原因，防止由于檢查不徹底導致不必要的浪費。另外，一旦電氣設備的檢查不到位還會導致另外的損失，使得機器設備遭受第二次的傷害，并且對維修人員來說也是二次傷害。檢測不到位會將檢修的工作過程變得復雜，并且對設備產生損失，為檢修工作帶來更多的傷害。因此，企業必須在檢修之前貫徹徹底性的原則，使得設備在出現問題時可以得到及時的修改，并且使得機器設備可以盡早地投入使用，進而推進工程進度

　?。?） Thoroughly, the maintenance and upkeep of electrical equipment must adhere to the principle of thoroughness. When electrical equipment malfunctions, the first step is to thoroughly investigate the cause of the malfunction and carefully inspect the machinery and equipment for any damage or improper areas. For detailed issues, it is also necessary to conduct in-depth inspections in order to clarify the internal and external reasons for equipment failures and prevent unnecessary waste caused by incomplete inspections. In addition, inadequate inspection of electrical equipment can lead to additional losses, causing the machinery and equipment to suffer a second injury, which is also a second injury for maintenance personnel. Inadequate detection can complicate the maintenance process and cause damage to the equipment, resulting in more harm to the maintenance work. Therefore, enterprises must implement the principle of thoroughness before maintenance, so that equipment can be modified in a timely manner when problems arise, and machinery and equipment can be put into use as early as possible, thereby promoting the progress of the project

　　（三）排除法另外，對于電氣設備的完善有時還需要采取排除法，對不可能產生的問題進行排除，進而縮小可能出現的問題范圍。并且對于設備的檢修之前必須確定極其設備是否存在問題，避免在不必要的情況下對電氣設備造成損害。電氣設備還可能存在接觸不良的問題，因此一定要盡的可能性對設備的線路問題進行排查，避免由于設備線路的問題產生對設備的誤解。通過對設備的排查，才能更好地對設備所出現的問題進行排查，從而防止故障的再次出現，影響工程的進度。

　?。?） In addition, for the improvement of electrical equipment, it is sometimes necessary to adopt the exclusion method to eliminate impossible problems and narrow down the scope of possible problems. And before the maintenance of the equipment, it is necessary to first determine whether there are any problems with the equipment, in order to avoid unnecessary damage to the electrical equipment. Electrical equipment may also have poor contact issues, so it is necessary to investigate the wiring problems of the equipment as much as possible to avoid misunderstandings caused by equipment wiring problems. By inspecting the equipment, we can better identify any issues that may arise and prevent the recurrence of faults that may affect the progress of the project.

　?。ㄋ模┘毠?jié)性，需要對電氣設備的細節進行檢查，才能保證對整個電氣設備進行完整的排查與檢修，防止再次出現問題，造成人力與物力的浪費。對于設備的電路、按鍵接觸性、保險絲以及電源等問題也要進行細致的檢修，防止由于小部件的受損而錯誤地對電氣設備進行錯誤的維護。除了上述的問題，設備的運作聲音也可以暗示著電氣設備的運行狀況，因此一定要注意觀察細節問題，從而對設備進行細致的檢修。只有注重檢修的細節性，才能更好地對設備出現的問題進行處理，從而進行檢修與更新。

　?。?） Finally, it is necessary to inspect the details of the electrical equipment in order to ensure a complete investigation and maintenance of the entire electrical equipment, prevent the recurrence of problems, and avoid wasting manpower and material resources. Detailed maintenance should also be carried out on the circuit, button contact, fuses, and power supply of the equipment to prevent incorrect maintenance of electrical equipment due to damage to small components. In addition to the above issues, the sound of equipment operation can also indicate the operating status of electrical equipment, so it is important to pay attention to details and conduct detailed maintenance on the equipment. Only by paying attention to the details of maintenance can we better handle equipment problems and carry out maintenance and updates.

　　電氣成套設備的三級保養

　　Third level maintenance of electrical complete equipment

　　一級日常維護保養：①班前、班后由操作工認真檢查設備擦拭各個部位和加注潤滑油，使設備經常保持整齊、清潔、潤滑、、并認真做好點檢記錄及交接班記錄:②班中設備發生故障，及時匯報故障參與故障排除、記錄故障時間及原因，確認維修效果。

　　Level 1 daily maintenance: ① Before and after work, operators carefully inspect the equipment, wipe all parts, and add lubricating oil to keep the equipment neat, clean, lubricated, and safe. They also keep meticulous inspection and handover records. ② In case of equipment failure during work, report the fault in a timely manner, participate in troubleshooting, record the time and cause of the fault, and confirm the repair effect.

　　二級操作工為主維修工為輔：①按計劃對設備進行局部拆卸和檢查、清洗規定的部位。②疏通油路、管道，更換或清洗油線、油氈、濾油器等。③調整設備各部位間隙，配合緊固設備各個部位。

　　Secondary operators are the main maintenance workers, with auxiliary maintenance workers: ① Carry out partial disassembly, inspection, and cleaning of designated parts of the equipment according to the plan. ② Clear oil circuits and pipelines, replace or clean oil lines, oil felt, oil filters, etc. ③ Adjust the gaps between various parts of the equipment and coordinate the fastening of each part of the equipment.

　　三級維修為主列入設備檢修計劃：①對設備進行部分解體“檢查和修理②更換或修復磨損件，清洗、換油。③檢查修理電氣部分;④局部恢復精度，滿足加工零件的要求。

　　Third level maintenance is mainly included in the equipment maintenance plan: ① Partial disassembly, inspection, and repair of equipment; ② Replacement or repair of worn parts, cleaning, and oil change; ③ Inspection and repair of electrical parts; ④ Partial restoration of accuracy to meet the minimum requirements for machining parts.

　　三、電氣設備檢修的方式方法

　　3、 Methods and approaches for electrical equipment maintenance

　?。ㄒ唬┳儔浩鞯臋z修變壓器是整個電氣設備的中心環節，因此保障變壓器的正常運轉是設備正常運作的重要手段。一旦變壓器出現問題就會使得電氣設備無法正常的投入使用，因此對于電氣設備的維護與保養是十分重要的。對于變壓器的維護與保養必須定時對變壓器的油位以及油溫進行監控，并且詳細將結果記錄下來。變壓器還有可能出現漏油的問題，因此一旦變壓器出現問題，一定要進行及時的處理，并對于變壓器的周圍小部件也要進行檢修，從而保障整個變壓器可以正常地為工程進行工作。

　?。?） The maintenance of transformers is the central link of the entire electrical equipment, so ensuring the normal operation of transformers is an important means of ensuring the normal operation of equipment. Once there is a problem with the transformer, it will prevent the electrical equipment from being put into normal use, so maintenance and upkeep of the electrical equipment are very important. For the maintenance and upkeep of transformers, it is necessary to regularly monitor the oil level and temperature of the transformer, and record the results in detail. Transformers may also have oil leakage issues, so once a problem occurs with the transformer, it must be dealt with in a timely manner, and the surrounding small components of the transformer must also be inspected to ensure that the entire transformer can work normally for the project.

　?。ǘ╇妱訖C 電動機也是電氣設備工作中不可或缺的部分，如何更好地對電動機進行保養也是十分關鍵的。工業電氣設備的主要工作動力都來自于電動機，但是由于電動機的易損傷程度較高，所以一定要注意對電動機的保養方式。需要進行日常的維護，并每天對電動機的運行情況進行檢查與記錄，其次一旦發現問題要及時處理，防止由于電動機出現問題從而導致更大的問題出現。

　　（2） Electric motors are also an indispensable part of electrical equipment work, and how to better maintain them is also crucial. The main working power of industrial electrical equipment comes from electric motors, but due to the high degree of damage to electric motors, it is necessary to pay attention to the maintenance methods of electric motors. Firstly, daily maintenance is required, and the operation of the motor should be checked and recorded every day. Secondly, once problems are found, they should be dealt with in a timely manner to prevent larger problems from occurring due to motor problems.

　　四、小結 隨著社會的發展，機器設備的發展程度也不斷地提升，而新技術的應用也是對電氣設備的又一種提升。而電氣設備作為一種容易受到損傷的機器設備，必須對其進行及時的檢修與維護，并定期對電氣設備進行維護與信息記錄。只有保障電氣設備良好地運行，才能推動企業工程的發展，保障實施的進度，從而促進企業的經濟發展。

　　4、 Summary: With the development of society, the level of development of machinery and equipment is constantly improving, and the application of new technologies is also another way to enhance electrical equipment. As a machine equipment that is easily damaged, electrical equipment must be promptly inspected and maintained, and regular maintenance and information recording of electrical equipment must be carried out. Only by ensuring the good operation of electrical equipment can we promote the development of enterprise engineering, guarantee the progress of implementation, and thus promote the economic development of enterprises.

　　本文由  山東電氣成套    友情奉獻.更多有關的知識請點擊  http://m.cnshanqi.com/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Electric For more related knowledge, please click http://m.cnshanqi.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.